Design Factory – Supporting technology students’ learning of general competences through university-industry collaboration

Authors

  • Juulia Lahdenperä HAMK Edu research unit, Häme University of Applied Sciences, Finland https://orcid.org/0000-0003-2430-8811
  • Jari Jussila HAMK Design Factory, Häme University of Applied Sciences, Finland
  • Anne-Mari Järvenpää HAMK School of Technology, Häme University of Applies Sciences, Finland https://orcid.org/0000-0001-6612-0150
  • Liisa Postareff HAMK School of Technology, Häme University of Applies Sciences, Finland

DOI:

https://doi.org/10.31129/LUMAT.10.1.1672

Keywords:

Design Factory, Technology education, University-industry collaboration, General competences, Design-based research

Abstract

Many studies emphasise the need for supporting higher education students to develop general competences. In this study, we report on the first cycle of a design-based research project conducted in the Design Factory context. The aim of the project is to understand how general competences can be integrated into course modules and within university-industry collaboration in a successful way. In this study, we report on a theoretical problem analysis and describe the design solution, namely the Design Factory implementation. We then move on to an empirical problem analysis and investigate how students reported developing general competences in the implementation. When discussing the implications for further developing the design solution, we conclude that communication has a vital role in university-industry collaboration; it is essential in clarifying the multilevel learning opportunities (e.g., the subject content, development of general competences) for students, and in aligning industry interests with educational learning objectives. We also reflect on the first development cycle as a whole and provide implications for refining the design process. Finally, we draw conclusions from the whole DBR project and provide a new theoretical perspective (cf. Edelson, 2002), namely design-based education in the co-creation contexts, that can be utilised when investigating the development of general competences in the Design Factory context.

References

Anderson, T., & Shattuck, J. (2012). Design-based research: A decade of progress in education research? Educational Researcher, 41(1), 16–25. https://doi.org/10.3102%2F0013189X11428813

Barab, S., & Squire, K. (2004). Design-based research: Putting a stake in the ground. Journal of the Learning Sciences, 13(1), 1–14. https://doi.org/10.1207/s15327809jls1301_1

Barrie, S., Hughes, C., & Smith, C. (2009). The national graduate attributes project: Integration and assessment of graduate attributes in curriculum. Australian Learning and Teaching Council.

Biemans, H., Nieuwenhuis, L., Poell, R., Mulder, M., & Wesselink, R. (2004). Competence-based VET in the Netherlands: Background and pitfalls. Journal of Vocational Education and Training, 56(4), 523–538. https://doi.org/10.1080/13636820400200268

Biggs, J. (1994). Student learning research and theory: Where do we currently stand? In G. Gibbs (Ed.), Improving student learning: Using research to improve student learning (pp. 1–19). Oxford Centre for Staff Development.

Biggs, J., & Tang, C. (2011). Teaching for quality learning at university (4th ed.). McGraw-Hill Education.

Björklund, T. A., Keipi, T., Celik, S., & Ekman, K. (2019). Learning across silos: Design Factories as hubs for co-creation. European Journal of Education, 54(4), 552–565. https://doi.org/10.1111/ejed.12372

Brown, A. L. (1992). Design experiments: Theoretical and methodological challenges in creating complex interventions in classroom settings. Journal of the Learning Sciences, 2(2), 141–178. https://doi.org/10.1207/s15327809jls0202_2

Caballero, G., Álvarez-González, P., & López-Miguens, M. J. (2020). How to promote the employability capital of university students? Developing and validating scales. Studies in Higher Education, 45(12), 2634–2652. https://doi.org/10.1080/03075079.2020.1807494

Chan, C. K. Y., & Fong, E. T. Y. (2018). Disciplinary differences and implications for the development of generic skills: A study of engineering and business students’ perceptions of generic skills. European Journal of Engineering Education, 43(6), 927–949. https://doi.org/10.1080/03043797.2018.1462766

Collins, A., Joseph, D., & Bielaczyc, K. (2004). Design research: Theoretical and methodological issues. Journal of the Learning Sciences, 13(1), 15–42. https://doi.org/10.1207/s15327809jls1301_2

diSessa, A. A., & Cobb, P. (2004). Ontological innovation and the role of theory in design experiments. Journal of the Learning Sciences, 13(1), 77–103. https://doi.org/10.1207/s15327809jls1301_4

Edelson, D. C. (2002). Design research: What we learn when we engage in design. Journal of the Learning Sciences, 11(1), 105–121. https://doi.org/10.1207/S15327809JLS1101_4

Freudenberg, B., Brimble, M., & Cameron, C. (2011). WIL and generic skill development: The development of business students’ generic skills through work-integrated learning. Asia-Pacific Journal of Cooperative Education, 12(2), 79–93.

From UAS to Career. (2020). UAS career monitoring survey—Results of the graduates of 2015. https://amk-uraseuranta.turkuamk.fi/en/results/

Geitz, G., & de Geus, J. (2019). Design-based education, sustainable teaching, and learning. Cogent Education, 6(1), 1647919. https://doi.org/10.1080/2331186X.2019.1647919

Greenbank, P., Hepworth, S., & Mercer, J. (2009). Term‐time employment and the student experience. Education + Training, 51(1), 43–55. https://doi.org/10.1108/00400910910931823

Hannula, J. (2019). Kehittämistutkimus: Matematiikan aineenopettajaopiskelijoiden matemaattisen ja pedagogisen sisältötiedon edistäminen ongelmalähtöisessä oppimisessa [Design-based research: Supporting the development of pre-service mathematics teachers’ mathematical and pedagogical content knowledge through problem-based learning] [Doctoral dissertation, University of Helsinki]. https://helda.helsinki.fi/handle/10138/303396

Healy, M., Hammer, S., & McIlveen, P. (2020). Mapping graduate employability and career development in higher education research: A citation network analysis. Studies in Higher Education, 1–13. https://doi.org/10.1080/03075079.2020.1804851

Jones, A. (2009). Redisciplining generic attributes: The disciplinary context in focus. Studies in Higher Education, 34(1), 85–100. https://doi.org/10.1080/03075070802602018

Jussila, J., Raitanen, J., Partanen, A., Tuomela, V., Siipola, V., & Kunnari, I. (2020). Rapid product development in university-industry collaboration: Case study of a Smart Design Project. Technology Innovation Management Review, 10(3), 49–59. https://doi.org/10.22215/timreview/1336

Juuti, K., & Lavonen, J. (2006). Design-based research in science education: One step towards methodology. Nordic Studies in Science Education, 2(2), 54–68. https://doi.org/10.5617/nordina.424

Kavanagh, M. H., & Drennan, L. (2008). What skills and attributes does an accounting graduate need? Evidence from student perceptions and employer expectations. Accounting & Finance, 48(2), 279–300. https://doi.org/10.1111/j.1467-629X.2007.00245.x

Kember, D., & Leung, D. Y. P. (2005). The influence of the teaching and learning environment on the development of generic capabilities needed for a knowledge-based society. Learning Environments Research, 8(3), 245. https://doi.org/10.1007/s10984-005-1566-5

Kunnari, I., Jussila, J., Tuomela, V., & Raitanen, J. (2019). Co-creation pedagogy from cSchool towards HAMK Design Factory. HAMK Unlimited Journal. https://unlimited.hamk.fi/in-english/co-creation-pedagogy/

Kunttu, L. (2017). Educational involvement in innovative university-industry collaboration. Technology Innovation Management Review, 7(12), 14–22. https://doi.org/10.22215/timreview/1124

Kunttu, L., & Neuvo, Y. (2019). Balancing learning and knowledge protection in university-industry collaborations. The Learning Organization, 26(2), 190–204. https://doi.org/10.1108/TLO-06-2018-0103

Mavromaras, K., McGuinness, S., O’Leary, N., Sloane, P., & Wei, Z. (2013). Job mismatches and labour market outcomes: Panel evidence on university graduates. Economic Record, 89(286), 382–395. https://doi.org/10.1111/1475-4932.12054

Mikkonen, M., Tuulos, T., & Björklund, T. (2018). Perceived long term value of industry project-based design courses: Alumni reflections from two decades of the Product Development Project. In P. Ekströmer, S. Schütte, & J. Ölvander (Eds.), DS 91: Proceedings of NordDesign 2018. Linköping University.

Miles, M. B., & Huberman, A. M. (1994). Qualitative data analysis: An expanded sourcebook (2nd ed.). SAGE Publications.

OECD. (2012). Assessment of higher education learning outcomes, AHELO feasibility study report Volume 1, Design and implementation. http://www.oecd.org/education/skills-beyond-school/AHELOFSReportVolume1.pdf

OECD. (2018). The future of education and skills—Education 2030. OECD Position Paper. https://www.oecd.org/education/2030-project/contact/E2030_Position_Paper_(05.04.2018).pdf

Pernaa, J. (2013). Kehittämistutkimus tutkimusmenetelmänä [Design-based research as a research methodology]. In J. Pernaa (Ed.), Kehittämistutkimus opetusalalla [Design-based research in education] (pp. 9–26). PS-Kustannus.

Plattner, H. (Ed.). (2010). Design thinking: Understand – improve – apply. Springer.

Projectbureau Competent HTNO. (2000). Gids voor het beschrijven van de landelijke kwalificaties in het HTNO [Guide to describe the national qualifications in the HTNO]. Competent HTNO.

Schaeper, H. (2009). Development of competencies and teaching-learning arrangements in higher education: Findings from Germany. Studies in Higher Education, 34(6), 677–697. https://doi.org/10.1080/03075070802669207

Schreier, M. (2012). Qualitative content analysis in practice. SAGE.

Strijbos, J., Engels, N., & Struyven, K. (2015). Criteria and standards of generic competences at bachelor degree level: A review study. Educational Research Review, 14, 18–32. https://doi.org/10.1016/j.edurev.2015.01.001

Thoring, K., & Müller, R. M. (2011). Understanding design thinking: A process model based on method engineering. In A. Kovacevic, W. Ion, C. McMahon, L. Buck, & P. Hogarth (Eds.), DS 69: Proceedings of E&PDE 2011, the 13th International Conference on Engineering and Product Design Education (pp. 493–498). Design Society.

Tu, J.-C., Liu, L.-X., & Wu, K.-Y. (2018). Study on the learning effectiveness of Stanford Design Thinking in integrated design education. Sustainability, 10(8), 2649. https://doi.org/10.3390/su10082649

Tuononen, T., & Lindblom-Ylänne, S. (2017). The transition from university to working life: An exploration of graduates’ perceptions of their academic competences. In E. Kyndt, V. Donche, K. Trigwell, & S. Lindblom-Ylänne (Eds.), Higher Education Transitions: Theory and Research. Routledge.

Tuononen, T., Parpala, A., & Lindblom-Ylänne, S. (2019). Graduates’ evaluations of usefulness of university education, and early career success – a longitudinal study of the transition to working life. Assessment & Evaluation in Higher Education, 44(4), 581–595. https://doi.org/10.1080/02602938.2018.1524000

Tuononen, T., Parpala, A., & Lindblom-Ylänne, S. (2020). Complex interrelations between academic competences and students’ approaches to learning – mixed-methods study. Journal of Further and Higher Education, 44(8), 1080–1097. https://doi.org/10.1080/0309877X.2019.1648776

Tynjälä, P., Virtanen, A., Klemola, U., Kostiainen, E., & Rasku-Puttonen, H. (2016). Developing social competence and other generic skills in teacher education: Applying the model of integrative pedagogy. European Journal of Teacher Education, 39(3), 368–387. https://doi.org/10.1080/02619768.2016.1171314

Ursin, J., Hyytinen, H., & Silvennoinen, K. (Eds.). (2021). Assessment of undergraduate students’ generic skills in Finland: Findings of the Kappas! Project (Vol. 31). Ministry of Education and Culture. http://urn.fi/URN:ISBN:978-952-263-892-2

von Thienen, J., Royalty, A., & Meinel, C. (2017). Design thinking in higher education: How students become dedicated creative problem solvers. In C. Zhou (Ed.), Handbook of research on creative problem-solving skill development in higher education. IGI Global. https://doi.org/10.4018/978-1-5225-0643-0

Downloads

Published

2022-03-29

How to Cite

Lahdenperä, J., Jussila, J., Järvenpää, A.-M., & Postareff, L. (2022). Design Factory – Supporting technology students’ learning of general competences through university-industry collaboration. LUMAT: International Journal on Math, Science and Technology Education, 10(1), 127–150. https://doi.org/10.31129/LUMAT.10.1.1672

Similar Articles

<< < 1 2 3 4 5 6 7 8 9 10 > >> 

You may also start an advanced similarity search for this article.